本软件下载地址未录入,如想要软件请评论,我们会补上!
hping是一個網路工具,可以用來測試firewall, 網路效能, 觀察遠端主機的回應狀態,包括TCP,UDP,ICMP
需要安装WinPCap才能用哦
First we would like to thank everyone who has made hping because we use it
constantly. We have found it to be one of the main tools we use when
testing out `odd` network traffic or that new application that no one can
really explain.
The main reason for this release is the fix the problem that was caused by
Microsoft releasing SP2 for SP and removing the ability for an application
to make use of `raw sockets`.
Some information on this can be found at:
http://www.microsoft.com/technet/prodtechnol/winxppro/maintain/sp2netwk.mspx#EHAA
This of course broke the ability for hping to send packets. Since we are sometimes
required to run the tool under Windows this was a problem. 😉
We decided to try and fix this. (We are James Fields [[email protected] and
Kevin Johnson [[email protected]])
We took a look at the code and then looked at what Fyoder and the NMAP team
did to fix the same issue. (NMAP is available at http://www.insecure.org and
we HIGHLY recommend it!) We saw that by using libdnet and some of the code
Fyoder had written, we could modify hping and enable it to work on Windows
again.
There are a couple notes that we would like to make you aware of:
* Hping now creates the entire Ethernet packet instead of depending on the
network stack. This means we will only support Ethernet networks. We
are not sure if hping supported other types before, but it definitely
doesn`t now.
* The timing of the packets is incorrect. By this we mean that when hping
displays the RTT of a packet it is higher then the actual RTT. This is
an error with how hing gets that time. We are looking at ways to fix
this and would love ideas or help.(see below) This bug existed in the
previous version of hping for Windows. We do not believe that our changes
have added any extra time to this display.
* The random destination scan now works correctly. This was a bug in the
original version for Windows.
We hope that you find this release useful. If you have any comments, questions
or just want to talk to someone, feel free to contact us directly. You can either
use the email addresses above or send an email to [email protected] and the
message will get to the two of us.
If we are able to make any other significant updates to this package, we will
upload it to the hping wiki at http://wiki.hping.org
Thanks
James Fields and Kevin Johnson
[[email protected]] [[email protected]]
May 24, 2006
###############################################################################
Original README
###############################################################################
First thing of note. Thanks to Salvatore Sanfilippo for the hping tool. It`s
helped me to better understand some network concepts. Much more info. can be
found at the `mother` site: http://www.hping.org .
There is also a wiki at http://wiki.hping.org.
Usage for Windows version of hping:
Here`s a URL for how to use hping (Unix and Windows version, except revisions with
Windows version listed below):
http://www.hping.org/manpage.html
Some differences in argument parameters and behavior compared to the Unix version
are as follows:
1. When hping is run in listen mode on Unix, memory paging is disabled. I haven`t
implemented this in the native Windows version. If I get all fired up at some
point, maybe I`ll try to figure it out.
2. There is an option to choose the network interface to use under Unix. I
haven`t seen a simple way that Windows defines the network interfaces (i.e. eth0,
ppp0, ...). Thus, I`ve used the IP address as an I.D. for a specific interface.
3. Under Unix, pressing ctrlz once will increment a port or ttl value
(depending on context) and pressing it twice will decrement it. I`ve changed this
to ctrlz will increment, ctrla will decrement.
4. The option for sending packets at a specified interval is done using
microseconds in Unix. For example: hping i u10000. Under Windows I`ve
changed this to milliseconds. Thus, the equivalent to the command above would
be: hping i m100 (10 packets per second).
Compile:
I compiled hping using the free DevC++ compiler, and had to link these libraries:
libwinmm.a
libws2_32.a
libwsock32.a
libwpcap.a
libiphlpapi.a
Using Microsoft Visual C++ you`ll have to link:
winmm.lib
ws2_32.lib
wsock32.lib
wpcap.lib
iphlpapi.lib
NOTE:
I have been able to successfully compile with the Borland and Visual C++
compilers. However, when attempting to send packets I get a 10049 socket error
code on a 'sendto`. I`m guessing it has something to do with how these compilers
deal with structs, but have not looked into it. Any ideas and/or help would be
much appreciated.
ANOTHER NOTE:
Also, the new SP2 for Windows SP appears to be causing some issues. Here`s a
link explaining some changes to raw sockets.
http://www.microsoft.com/technet/prodtechnol/winxppro/maintain/sp2netwk.mspx#EHAA
Some people have reported some problems with Windows SP SP2. TCP packets don`t
get sent out (10004 error). UDP and ICMP appear to be fine. (However, you
cannot spoof an IP with UDP packets). I`d like to get more feedback from
other people on how it is working on Windows SP SP2 machines.
SCAN MODE:
In regards to hping2rc3win32 version. I have implemented the scan mode
for windows now. The only switch that won`t work is scanning for 'known`
ports. The argument would be something like:
'hping scan known <hostname>`
I haven`t looked too hard into how to implement it, but for now it doesn`t work.
I wanted to get something out for the scan mode as it`s a very useful function.
Any comments can be sent to [email protected]
>
链接:https://www.lvruan.com/app/104305
本站资源仅供个人学习交流,请于下载后24小时内删除,不允许用于商业用途,否则法律问题自行承担。
相关推荐
- 暂无文章
LvRuan.com=绿软=绿盟=绿色软件联盟
情怀第一 18年 老牌 下载站 绿色 安全 无广告 无捆绑
- 结构设计计算EXCEL全集(最新更新)
- 60个结构设计小软件
- 工程造价小软件工具合集
- 通讯录/生日提醒管理系统 2010
- GoldenSection Reader 4.4 Build 1900
- 密码查看器 V2.05 Build 1106_绿软版_强劲的密码查看软件
- 坚固黄金白银行情分析软件 1.0
- 课表管理 V3.0
- 杀价牛-专业杀价应用
- 黑暗潜伏者七项修改器
- RemoteNaturalLanguage.dll修复文件
- 小马工具箱V1.0.1 电脑系统日常维护工具
- 中医子午流注软件正式版 4.1
- MallHaHa - 国外购物平台
- CryptoCrat 2005 V4.61
- 播放器BubbleUPnP 2.7.2 安卓汉化版
- 福星万年历 2.59 绿软版_精度高的历算程序
- 六度蜂窝 V1.5.1 For Ios - 价值观体现社交平台
- 全球电视直播 1.5 绿软版
- 电梯人
- 猎燕城市达人qq号码提取器 4.0
- 一键生成QQ个人历史报告工具 v1.0 免费版
- 超星尔雅考试助手